WPW10438710 Oven Control Board Repair

Image of control board part WPW10438710

WPW10438710 Oven Control Board Repair

Regular Price $140.00

Product Type : Control Board Repair Service

-
+
in stock SOLD OUT
This is also the correct repair service for the alternate and replacement part numbers below
W10105800R
PS11754734
AP6021410
W10105800
W10438710
W10340943
8303884
8303819
4446809
B008DJNTEO
B004Q41HSU
B00D8P88DA
B004Q4171M
B001DPTCSM
B008DK4KFK
Models Numbers That Use This Control Board
RMC305PVT01
GMC275PRB00
GMC275PRB01
GMC275PRQ00
GMC275PRQ01
GMC275PRS00
GMC275PRS01
GMC275PRT00
GMC275PRT01
GMC305PRB00
GMC305PRB01
GMC305PRQ00
GMC305PRQ01
GMC305PRS00
GMC305PRS01
GMC305PRS02
GMC305PRT00
GMC305PRT01
GMC305PRY01
RMC275PVB00
RMC275PVB01
RMC275PVQ00
RMC275PVQ01
RMC275PVS00
RMC275PVS01
RMC275PVT00
RMC275PVT01
RMC305PVB00
RMC305PVB01
RMC305PVQ00
RMC305PVQ01
RMC305PVS00
RMC305PVS01
RMC305PVT00
General Information
If you are experiencing any of the symptoms below and have ruled out the possible alternative causes, then your oven control board should be inspected. If you are experiencing any symptom not listed, please don't hesitate to email an inquiry - your control board could still be at fault.
Common Symptoms of Failed Control Boards
  • "Dead" Oven
  • Your oven display will not show anything
  • Your oven may shut off during use
  • You cannot control the oven
  • You may have trouble controlling the temperature
  • Your oven will not heat
  • The oven door will get stuck in lock position
Whirlpool/KitchenAid Error Codes
F1 and variants - these error codes may also be caused by a faulty touchpad or ribbon cable.
  • F1 E1
  • F1 E2
  • F1 E3
  • F1 E4
  • F1 E5
F2 and variants - these error codes may also be caused by a faulty touchpad or ribbon cable.
  • F2 E0
  • F2 E1
  • F2 E5
  • F2 E6
F3 and variants - these error codes may also be caused by faulty temperature sensors or oven wiring.
  • F3 E0
  • F3 E2
F5 and variants - these error codes may be caused by faulty oven door latch/lock mechanisms or oven wiring.
  • F5 E1
General Electric/Dacor/Other Error Codes
  • F0, F1 or F7 - these error codes may be caused by a faulty oven touchpad or ribbon cable.
  • F2, F3, F4 - these error codes may be caused by faulty oven temperature sensors or oven wiring.
  • F5 or F6 - these error codes may also be caused by faulty oven door latch/lock mechanisms or oven wiring.
  • U43 or L43 (Dacor only) - Relay board failure.
Frequently Asked Questions
Question:
Do you sell new control boards?
Answer:
Unfortunately the manufacturers no longer make these control boards, our goal is to provide a repair service to save you money so you don't have to buy a new appliance.
Question:
How long does the whole process take?
Answer 1:
Once the board arrives at our facility, it will take 2-3 days for us to repair and test the board. We will return it to you via USPS Priority Mail which is a 2-3 day shipping service. Depending on the service you choose to send us the board, the total turn around time is generally 9-10 days.
Answer 2:
If you choose UPS Ground, that can take upwards of 5 days transit time depending on where you are in the country. We are in Austin, TX
Answer 3:
You can also choose 'Custom Shipping' and pay just $140 during checkout. You will then get a form with our address which you can reference to make your own shipping label. USPS Priority Mail is usually the best priced 2-3 day service from anywhere in the country.
Question:
How do I know if a control board repair is what I need?
Answer:
If your oven is showing any of the symptoms above, there's a good chance your control board has failed. If you have more questions please feel free to send an inquiry.
Question:
What if I send a board to you and it is not reparable, or it is not the problem?
Answer 1:
If we receive a board that is damaged beyond repair, we will refund you the $140 service price. If you want the board back, you will have to pay for the return shipping (which can be subtracted from the refund)
Answer 2:
If we receive a board that is fully functional and suspect the problem to be elsewhere in the appliance, we charge a $40 Diagnostic fee plus return shipping to send the board back. We will refund you the difference between that total and the $140 service price, and help you troubleshoot the actual problem.
Question:
Do you offer a warranty on your repairs?
Answer:
All of our repairs are backed by a 1 year warranty, if your board fails again within that period it will be repaired at no cost.
Question:
I see here that the price is $140 + shipping, and that there is a UPS label price added on during checkout. Is that price for shipping both ways? Or will I also have to pay for the return shipping?
Answer:
You pay for the price of inbound shipping to our facility. The return shipping to you is included in the $140 service price.
Question:
I can't find my part listed on your site. Can you repair it?
Answer:
Please send an email to info@applianceboardrepair.com that includes the model number of your appliance and a description of your problem.
How the repair process works
Step 1
Find the part you want repaired and click the ADD REPAIR TO CART button
Step 2
Ship your broken board to our repair facility. After you checkout we will provide you with an address and shipping label
Step 3
Once we receive your part we will diagnose and repair any issues we find. We will keep you in the loop and let you know what's going on.
Step 4
After your part is repaired and thoroughly tested, we will mail it back to you. (The repair process usually takes 2 to 3 business days)
Step 5
After the repair process, we will follow up to make sure everything is in working order
Any additional questions, concerns or comments? Let us help, email us at info@applianceboardrepair.com
Top
Added to cart :
Add to cart failed :
prouduct successfully added to wishlist !