800 507 2016
Mon-Fri: 8:00am - 6:00pm
Oven Error Codes
Oven Control Board Part: WB27K5203
Back to Search
General Electric Electric wall oven
Alternate part numbers for this part
WB27K5116 | AP2025173 | 254379 | AP2025102 | WB27K5046 | WB27K5197
This is the correct repair service for any of the parts listed above. This board also works in multiple models, check the model list below or click
models that use this control board
Control Board Repair
Includes the following:
One year warranty
How the repair process works
Find the part you want repaired and click the
SELECT FOR REPAIR
Mail your broken part to our repair facility. After you checkout we will provide you with an address and shipping label depending on the shipping option you choose at checkout
Once we receive your part we will diagnose and repair any issues we find.
After your part is repaired and thoroughly tested, we will mail it back to you. (The repair process usually takes 2 to 3 business days)
After the repair process, we will follow up to make sure everything is in working order
Any additional questions, concerns or comments? Let us help, email us at
or give us a call
If you are experiencing any of the symptoms below and have ruled out the possible alternative causes, then your oven control board should be inspected. If you are experiencing any symptom not listed, please don't hesitate to email an inquiry - your control board could still be at fault.
Common Symptoms of Failed Control Boards
Your oven display will not show anything
Your oven may shut off during use
You cannot control the oven
You may have trouble controlling the temperature
Your oven will not heat
The oven door will get stuck in lock position
Whirlpool/KitchenAid Error Codes
F1 and variants - these error codes may also be caused by a faulty touchpad or ribbon cable.
F2 and variants - these error codes may also be caused by a faulty touchpad or ribbon cable.
F3 and variants - these error codes may also be caused by faulty temperature sensors or oven wiring.
F5 and variants - these error codes may be caused by faulty oven door latch/lock mechanisms or oven wiring.
General Electric/Other Error Codes
F0, F1 or F7 - these error codes may be caused by a faulty oven touchpad or ribbon cable.
F2, F3, F4 - these error codes may be caused by faulty oven temperature sensors or oven wiring.
F5 or F6 - these error codes may also be caused by faulty oven door latch/lock mechanisms or oven wiring.
Oven model numbers that use this control board
Frequently Asked Questions
Do you sell new control boards?
Unfortunately the manufacturers no longer make these control boards, our goal is to provide a repair service to save you money so you don't have to buy a new appliance.
What is the turnaround time for the repairs?
Your board should be repaired and on it's way back in 2 to 3 business days after it is received.
How do I know if a control board repair is what I need?
If your oven is showing any of the
, there's a good chance your control board has failed. If you have more questions please feel free to send an
or give us a call 800-507-2016.
What if I pay to send in my board and it's not the problem?
When we receive your board, we'll run diagnostics on it and if the problem is not your board we'll only charge a diagnostic fee and help you figure out what the issue could be.
Do you offer a warranty on your repairs?
All of our repairs are backed by a 1 year warranty, if your board fails again within that period it will be repaired at no cost.